Canon Mg7700 Mac Manualeagleecho

  1. Canon Mg7700 Software
  1. Setting items for LAN using Bonjour for Mac OS. Enable/disable Bonjour. Selecting Enable allows you to use Bonjour to perform the network settings. Specifies the Bonjour service name. You can use up to 48 characters for the name. You cannot use the same service name as that already used for other LAN connected devices.
  2. Select Test Print from the pop-up menu on the Canon IJ Printer Utility. Click the Print Head Alignment icon. A message is displayed. Load paper in the printer. Load one sheet of A4 size or Letter size plain paper into the cassette 2. The number of sheets to be used differs when you select the manual head alignment. Execute head alignment.
  1. Cannot Find Machine on Wireless LAN
Canon Mg7700 Mac Manualeagleecho
  1. Check1Make sure machine is turned on.

  2. Check2Is icon displayed on touch screen?

    If the icon is not displayed, tap the icon on the upper right and select Activate wireless LAN on the Change LAN screen.

  3. Check3If machine is temporarily connected to computer via USB cable, make sure USB cable is connected properly.

    If you set up the wireless LAN connection or change the wireless LAN settings using IJ Network Tool over a USB connection, connect the machine and the computer using a USB cable as the illustration below.The USB port is at the back of the machine.

  4. Check4Make sure machine setup is complete.

    If it is not, perform setup.

    • For Windows:

      Use the Setup CD-ROM or follow the instructions on the Canon website.

    • For Mac OS:

      Follow the instructions on the Canon website.

  5. Check5If using IJ Network Tool, look for machine again.

    • For Windows:

    • For Mac OS:

  6. Check6If searching for machine over a network, make sure machine is associated with a port. (Windows)

    If No Driver appears under Name in IJ Network Tool, the machine is not associated with a port.Select Associate Port in the Settings menu to associate a port with the machine.

  7. Check7Make sure machine and wireless router network settings match.

    See instruction manual provided with wireless router or contact its manufacturer to check wireless router settings, and then modify machine settings to match.

  8. Check8Check for obstructions.

    Wireless communication between different rooms or floors is generally poor.Move the machine and wireless router as necessary.

    To check the radio status,

    • For Windows:

    • For Mac OS:

  9. Check9Make sure the machine is not placed too far away from the wireless router.

    The machine can be up to 50 m (164 ft) from the wireless router indoors.Make sure the machine is close enough to the wireless router to be used.

    To check the radio status,

    • For Windows:

    • For Mac OS:

  10. Check10Make sure there is no source of radio wave interference nearby.

    If a device like a microwave oven that emits radio waves of the same frequency bandwidth as a wireless router is nearby, it may cause interference.Place the wireless router as far away from interference sources as possible.

    To check the radio status,

    • For Windows:

    • For Mac OS:

  11. Check11Make sure computer network settings are correct.

    Make sure the computer can communicate with the wireless router over the wireless LAN.

  12. Check12Make sure Enable bidirectional support is selected in Ports sheet of properties dialog box of printer driver. (Windows)

  13. Check13Make sure security software's firewall is off.

    If your security software's firewall is on, a message may appear warning you that Canon software is attempting to access the network.If this warning message appears, set security software to always allow access.

    If you are using any programs that switch between network environments, check their settings.Some programs use a firewall by default.

  14. Check14If using a router, connect machine and computer to LAN side (same network segment).

  15. Check15If machine is connected to an AirPort Base Station via LAN, use alphanumeric characters for network name (SSID). (Mac OS)

Printing from Computer. Printing from Application Software (Windows Printer Driver) Printing from Application Software (Mac OS Printer Driver) Printing Using Canon Application Software. Download Canon PIXMA MG7700 Printer XPS Driver 5.90 (Printer / Scanner). Effortlessly connect and impress with premium quality prints. The Canon PIXMA MG7700 Series includes the MG7750, MG7751, MG7752 and MG7553 models.

If the problem is not resolved, redo setup.

Mac
  • For Windows:

    Use the Setup CD-ROM or follow the instructions on the Canon website.

  • For Mac OS:

    Follow the instructions on the Canon website.

Mac

Canon Mg7700 Software